Tips for dealing with the memory already in it is dead based on experience in the hardware world, with him on the accuracy of 70%, so for example you have 10 off-chip memory so there is likely 7 in the chip can still be saved ...? money we can save several hundred thousand.
Ok, simply prepare the memory die and the equipment is in need Avometer.
1. Clear memory with a rub-pin pin memory with the purpose of cleaning cloth, may also give Tiner in a little more to clean from dust, and friction with the cloth will also provoke ion-ion on the pin memory terpacu that konduktornya become more active.
2. Navigate Avometer on the Ohm scale (scale to measure the barrier), may be in a position free of 1K, 10K, 100K ...
3. Take the needle negative (-) Avometer (black cable) and paste in one of the pins / memory foot, needle and positive (red cable) to the friction on the set of foot-leg IC / chipset memory, when memory has 8 pieces such as the IC friction needle (+) to the foot-IC is 8 feet.
4. Done .... Please try to install memory on the Mainboard slotnya ....!
Note:
This process is utilizing the flow of electric current from the Battery to Avometer circuits in the IC-circuit / chipset memory. How this process is working as well as the Clear CMOS on the Mainboard and crash if you do not want to live, namely the occurrence of interruption or stoppage in the flow of electricity so that the flow in
to the need for a system not required .... or as illustrations of the fainting or coma then we try to wake to the way in electric .. etc..
Ok, simply prepare the memory die and the equipment is in need Avometer.
1. Clear memory with a rub-pin pin memory with the purpose of cleaning cloth, may also give Tiner in a little more to clean from dust, and friction with the cloth will also provoke ion-ion on the pin memory terpacu that konduktornya become more active.
2. Navigate Avometer on the Ohm scale (scale to measure the barrier), may be in a position free of 1K, 10K, 100K ...
3. Take the needle negative (-) Avometer (black cable) and paste in one of the pins / memory foot, needle and positive (red cable) to the friction on the set of foot-leg IC / chipset memory, when memory has 8 pieces such as the IC friction needle (+) to the foot-IC is 8 feet.
4. Done .... Please try to install memory on the Mainboard slotnya ....!
Note:
This process is utilizing the flow of electric current from the Battery to Avometer circuits in the IC-circuit / chipset memory. How this process is working as well as the Clear CMOS on the Mainboard and crash if you do not want to live, namely the occurrence of interruption or stoppage in the flow of electricity so that the flow in
to the need for a system not required .... or as illustrations of the fainting or coma then we try to wake to the way in electric .. etc..
Comment
THERE ARE 0 COMMENTS FOR THIS POST
Post a Comment